Spruce specificisations in Skiboard Table 2020.21

[ysb33r]

Is the data on the Spruce skiboards correct in the table? Ospreys, Crossbows and Slingshots are all indicated to be 0 camber. Unless I misunderstand how...

[ysb33r]

I'm lightweight enough not to require any setback, so all my riding is done center-mount. I can also get away with stuff a 90kg+ rider might not. Having...

[ysb33r]

I don't think the Alpinas are in the same class as the new Nordica HFs...

[ysb33r]

Out downhill skiboarding today. We had some rain yesterday which later turned to snow in places. This caused an interesting mix - some great soft snow...

[ysb33r]

Nice pics!

[ysb33r]

Thanks. Unfortunately those Marauders already have direct-mounted bindings....

[ysb33r]

By some further measurements I think that the Slide be a non-starter for any boot length under 300m (Roughly Mond 27/28 depending on brand). The rear...

[ysb33r]

I cam up with some measurements (±1mm).

The standard Spruce Riser (2021) is 535mm and the plastic plate is 234mm. There is just under 480mm...

[ysb33r]

If anyone in Europe have a pair of Marauders or Invertigos to sell, I might be interested. I am only interested in the boards themselves - I don't want...

[ysb33r]

Here a are some measurements (±1mm)
- Length of Spruce Riser 535mm
- <480mm between furthest mounting holes on Spruce Riser
- Spruce...

[ysb33r]

I'm very intrigued by this, but also very aware that there would be quite a bit of work in this to make a commercial product.

As it stands...

[ysb33r]

I was back touring with Slingshots today with a group. Lots of variable snow, but we had sections of very soft sugary snow, which caused problems on the...

[ysb33r]

Took the plunge and ordered two pairs....

[ysb33r]

It would be great if it can do both 4x4 and 4x10....

[ysb33r]

For those of us who loved the REs and ease of getting in and out of boots, the easy adjustability etc. well, it seems that REs are making a comeback....

[ysb33r]

Exactly that - more control.

Also the RCs will run slower due to the forward snow impact being higher on a wide tip.


...

[ysb33r]

Nice idea. Some day in March could be a decent time.

Sent from my Mi Note 10 Pro using Tapatalk...

[ysb33r]

I wasn't happy with the edges on my Slingshots. They were set to 1 on the base and 2 on the edge. The guy from the ski shop recommended we try 0.5 on...

[ysb33r]

Stuck in flats indeed. Might be safe, but so tiring and frustrating

Sent from my Mi Note 10 Pro using Tapatalk...

[ysb33r]

I've been giving thought to flex quite a bit the last couple of weeks. Basically the shorter the section that touches the board underfoot is, the more...