Spruce binding Instruction manuals

[Bad Wolf]

Anybody have a set of Spruce instructions for Head/Tyrolia bindings? I picked up a riser with Head SL100 bindings (same as the Tyrolia's) for my daughter and need to know what holes to move the bindings to for her boot sole size (272mm). Looking at the heel holes it appears it can only go 1 set of holes farther forward (the other holes must be for Salomon bindings). Can go 2 back on the toe. I know I can send them back to Jeff at Spruce to have them adjusted, but it is straightforward I can do it myself as long as I know which holes to use.

I had a similar problem and sent Jeff an email, he kindly replied with the instructions. All you really need to know is which holes on the riser to use for you binding. Do make sure you have a posidrive screwdriver to get a good grip and not strip the head. Also be careful not to over tighten as the screw is steel and the riser aluminium.

[Bluewing]

Spruce Riser Manuals for Head/Tyrolia Bindings

Anybody have a set of Spruce instructions for Head/Tyrolia bindings? I picked up a riser with Head SL100 bindings (same as the Tyrolia's) for my daughter and need to know what holes to move the bindings to for her boot sole size (272mm). Looking at the heel holes it appears it can only go 1 set of holes farther forward (the other holes must be for Salomon bindings). Can go 2 back on the toe. I know I can send them back to Jeff at Spruce to have them adjusted, but it is straightforward I can do it myself as long as I know which holes to use.

[slow]

Axium Pro Series Manual

For those with earlier model Spruce Axium Pro Series Risers:
https://acrobat.com/#d=Wh2H1VFAUqRx*snaDo89zg

[slow]

Composite Riser Manual

For those with early model Spruce Composite Risers:
https://acrobat.com/#d=OJ03zcWVvYrtGICusJHF1A

[jjue]

Here is the link to downloads of the Spruce release binding instruction manuals

http://www.spruceski.com/downloads.html