How to build a backyard jib for off-season practice.

[Dave Bloom]

[ny300z]

haha that was awesome.

prolly the best instructional vid ive seen on how to make one. wish i saw this last year before i made a sh*tty one.

dave, can you tell me the length and height of the pieces.

like the kicker, the drop and the flat.

good job on the vid

[tyberesk]

haha that was awesome.

prolly the best instructional vid ive seen on how to make one. wish i saw this last year before i made a sh*tty one.

dave, can you tell me the length and height of the pieces.

like the kicker, the drop and the flat.

good job on the vid

This is roughly the blueprint I followed for mine

[ny300z]

^^^well that helps thanks!

maybe ill go home tonight and get the specs off mine and see what u guys think. Now that i see that blueprint i think my flat is too short

[tyberesk]

^^^well that helps thanks!

maybe ill go home tonight and get the specs off mine and see what u guys think. Now that i see that blueprint i think my flat is too short

That blueprint is for skis...so the flat needs to be a bit longer in that one.

[ny300z]

That blueprint is for skis...so the flat needs to be a bit longer in that one.

that makes sense

[Dave Bloom]

The dimensions on mine are completely different.

(LxWxH)

Drop-in Deck: 4'x4'x4'
Drop-In Ramp: 7'x4'x4'
In-Run: 8'x4'x4"
Kicker: 4'x4'x1.5'

The rail is 1/4" PVC Pipe, 3" diameter, 10' in length. I will be adding a 5' piece to give it a total of 15'.

I used three layers of snow fence for the surface and simply wet it for riding. The day was windy so it was slower than normal. When it snowed it was extremely fast.

[ny300z]

thanks^^^

i only put one layer of snow fence on mine. 3 layers make it faster?

[ny300z]

yea my dimensions are f*cked haha, i shouldve took my time and found blueprints like posted above.

here are mine, all the widths are standard plywood size, i didnt measure.

Drop in Deck - 4ft 6" high
Drop in Ramp - 8ft long
In Run - 4ft
Kicker - 1ft 11" long and only 10" high

the kicker def needs modding. I might start over this summer

[Dave Bloom]

The three layers are interlaced so that there is no surface area of the plywood showing. This way when you wet it there is no absorption into the wood so your boards will flow over 100% snow fence surface area for maximum performance.

I will be living back east this summer with tons of time on my 2 1/2 month vacation. So, if you need help I could come down and work with you on it. I'd be so down for a backyard jib session.

[ny300z]

The three layers are interlaced so that there is no surface area of the plywood showing. This way when you wet it there is no absorption into the wood so your boards will flow over 100% snow fence surface area for maximum performance.

I will be living back east this summer with tons of time on my 2 1/2 month vacation. So, if you need help I could come down and work with you on it. I'd be so down for a backyard jib session.

sounds good bro thanks

[pinkkid]

That was really cool Dave! Nice editing! Not that I'm gonna build one, but cool none the less for others!

[jackschmid]

nice 2-7 on!

[Synn]

The video was removed.

[Dave Bloom]

Sorry, this was the first video I created when I moved out here to Colorado and there were issues with music and licensing. If you PM me I can give you my email address and we can discuss it further if you are looking to build something.