Originally posted by stevelaw
View Post
Announcement
Collapse
No announcement yet.
Advice & Stuff
Collapse
X
-
stevelaw,
I will suggest a technique that I learned from a skier at the very beginning of the season that has essentially done away with my side preference when I have the good sense to use it. By the way, I think we all naturally favor one side or the other. Of course, this is more pronounced in some.
So, say you want to turn to the right. The technique is to push straight down the side of your downhill leg with your hand. Do this in a deliberate, muscles tensed manner. Exactly as if you were doing an isometric exercise. Then, continue in this fashion pushing your hand out towards the tip of your ski. There is no need to turn the board. Keep it going straight. Your change in posture and weight distribution will produce the turn. You can do this when going fast or slow. It is the consistent, deliberate action that produces the consistent, deliberate result.
The guy that taught me was a gentle, old skier who noticed from being behind me on the slope that I produced a stronger, more appropriate right hand turn than left. I am left handed. While everyone might not need this technique, it has produced absolutely fabulous results for me and has made me a more confident, more competent rider
Leave a comment:
-
Originally posted by slow View PostSome of us find that we have had to spend more time "tuning" boots than skiboards. Each of my feet are different enough in length and volume that until I went to rear entry boots which have a wide range of adjustment features, I had to use either heat molded liners or boot foam from tognar to get rid of the slop. Check out the tognar website and search for boot fitting aids to buy the boot foam. This is the lowest cost option.
On a side note, I had a ton of people make comments last night about the Spruce 120's. Nothing negative...mostly just asking what they were, how they are fat ski's, etc. One kid stopped and said that he had 'skiblades' too, but they are a lot shorter...haha. The funniest was when one guy working in the lift line asked what they were, and mentioned he's never seen anything like them before.
Leave a comment:
-
Some of us find that we have had to spend more time "tuning" boots than skiboards. Each of my feet are different enough in length and volume that until I went to rear entry boots which have a wide range of adjustment features, I had to use either heat molded liners or boot foam from tognar to get rid of the slop. Check out the tognar website and search for boot fitting aids to buy the boot foam. This is the lowest cost option.
Leave a comment:
-
Proper fitting boots will make a big difference. Any "boot slop" that you have if your foot moves inside the boot means that less of your effort is going to be transferred into your boards during a carve. Thicker socks might be able to help a little bit if it isn't too bad.
That aside, it is common to have a dominant turning direction on the beginning. Just keep working on turning both ways, and it will eventually balance out.
Leave a comment:
-
Originally posted by shortydude View PostMost ski socks are very thin. You might try some really thick socks. If your only going out for 3 or 4 hours at a time moisture will probably be manageable.
Thanks.
Leave a comment:
-
Originally posted by ysb33r View PostIt definitely helps to have your ankle and heel tight fitting. I also had to make a slight adjustment to the canting on the one boot.
I'll try practice putting the boots on today.
Originally posted by ysb33r View PostBut moreover I found that it was a case of pro-actively developing the muscle memory on the weaker leg. I just worked on trying to do more aggressive turning and stopping on the weaker leg. Just keep on working on using your knees for turning and not your hips.
Thanks!
Leave a comment:
-
Most ski socks are very thin. You might try some really thick socks. If your only going out for 3 or 4 hours at a time moisture will probably be manageable.
Leave a comment:
-
Originally posted by stevelaw View Post...but I feel like one side is stronger than the other. I'm right handed, and am much better at carving to the left (with my right foot on the outside). I feel like my left foot is retarded sometimes, because I just can't get it on edge as easily....and even when I am going straight, it feels like that ankle/skiboard is all floppy, and about to lose control more so than the other.
But moreover I found that it was a case of pro-actively developing the muscle memory on the weaker leg. I just worked on trying to do more aggressive turning and stopping on the weaker leg. Just keep on working on using your knees for turning and not your hips.
Leave a comment:
-
Sounds to me like you need some boots that fit. Boots are everything!
Leave a comment:
-
Advice & Stuff
I just went out my 4th time this year, about 3-4 hours at a time. I've pretty much conquered the bunny hills (I know...nothing to brag about), and can carve on a dime on those. I've also have been riding some green trails, and doing fine. I only fell once in 4 hours.
...but I feel like one side is stronger than the other. I'm right handed, and am much better at carving to the left (with my right foot on the outside). I feel like my left foot is retarded sometimes, because I just can't get it on edge as easily....and even when I am going straight, it feels like that ankle/skiboard is all floppy, and about to lose control more so than the other.
I was thinking it may be my ski boots at first. I kept tightening them as the day went on, but that didn't really seem to help. One thing I did notice, is that my ski boots are not super tight around my calves, and less tight on the left leg. And unfortunately I cannot tighten them anymore. Would that matter? I wasn't sure how tight my boots should be in the first place when using skiboards. Should I keep them less tight?
Anyone else get that feeling? Any ideas?
Thanks.Tags: None
Leave a comment: