will all of the skiboard releasable bindings on SBOL fit a size mondo 32 boot?
Announcement
Collapse
No announcement yet.
Will my ski boots fit in the bindings
Collapse
This is a sticky topic.
X
X
-
skiboard bindings are designed to work with all ski boots however some people have extremely large feet and might need to do a bit more investigating before they buy. If you're foot is 13 and under you should be OK but if it's over a size 13 you should check the sole length.
mondo size isn't a good method of determining if your boot will fit a binding because the main factor is boot sole length which mondo doesn't represent. two mondo 32 boots could have very different sole lengths. so, the most precise method is to measure the sole length of your boot in mm or look at the 3 digit number stamped in the plastic on the lower heel. It will look like this: 338mm
then take that number see if it falls within the range of sole length limits for each binding on this chart
GLast edited by Greco; 02-05-2012, 08:45 PM.
-
spruce can do a custom mount of their pro series risers which will work with your boot size. If this is something you want place your order online and in the special instructions block of the order form type your boot sole length and that you would like a custom mount and we'll get spruce to hook you up.
gLast edited by Greco; 01-26-2009, 12:12 PM.
Comment
-
If you want to go with non-releaseable bindings you could always just wait until next season when hopefully there should be more XL Bombers.I do it because I can.
I can because I want to.
I want to because you said I couldn't.
"The butterflies in my stomach have flown up through my throat and learned to love the open air." - World/Inferno
Spruce Sherpas with Prime Pros
'08 KTPs
Comment
-
psh i have been waiting for roughly 2-3 years to find something that worked. so finally i gave up and ordered 94cm snowblades from levelninesport with sl100 bindings(ski type bindings) that will take my 31.5 boot. good luck to you.. these idiots that make stuff for everyone seem to think that people instantly stop having any thing over size 13 feet,
same as snowboarding.. my flow bindings barely take my 14 boot. and 13-14 isn't really a rare size, very common actually.. they need to wake up in the snow sport industry to this common issue.
Comment
-
Originally posted by Eagle78
Sorry to keep harping on the issue, but is there a custom mount for non-releasable bindings? I don't really want to be forced to use releasable bindings.
g
Comment
-
Re: skiboard binding question
Originally posted by Jpdst29
will all of the skiboard releasable bindings on SBOL fit a size mondo 32 boot?
Is there any hard shell snowboard boot that will fit into a release binding? Or are they strictly for No release?
I am tired of walking in ski boots....
Boards:
Spruce 120s(x2), ALPs(x3), Lacroix 99's, BWPs.
Bindings:
Pro Prime Riser/Rossi Bindings(x2).
Comment
-
Re: Re: skiboard binding question
Originally posted by Manlenium
I have a question realated to this.......
Is there any hard shell snowboard boot that will fit into a release binding? Or are they strictly for No release?
I am tired of walking in ski boots....
best thing I ever did.
Comment
-
Originally posted by BrklynCarver
UPZ Boots - http://www.upzboots.com/
Boards:
Spruce 120s(x2), ALPs(x3), Lacroix 99's, BWPs.
Bindings:
Pro Prime Riser/Rossi Bindings(x2).
Comment
-
Re: Re: Re: skiboard binding question
Boards:
Spruce 120s(x2), ALPs(x3), Lacroix 99's, BWPs.
Bindings:
Pro Prime Riser/Rossi Bindings(x2).
Comment
Comment