Announcement

Collapse
No announcement yet.

Non-Release Bindings on 130 Sherpas

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Non-Release Bindings on 130 Sherpas

    I know this is not recommended and a higher risk of injury HOWEVER, is it possible to install 4x4 non-release bindings on Sherpa’s?

  • #2
    Originally posted by CanadaRick View Post
    I know this is not recommended and a higher risk of injury HOWEVER, is it possible to install 4x4 non-release bindings on Sherpa’s?
    The industry standard for non release is 110 cm, that's why you don't find 4x4 inserts factory installed on anything longer. Personally, I won't use non release on anything over 100 cm. I would imagine the risk for injury on a something as long as 130 cm would be very high. But....each to their own, and yes, it can be done.

    It's not easy to do, but there are several after market systems that allow you to install inserts into any ski product. Many require you to go through the base, so it's not a quick or easy job.
    Just these, nothing else !

    Comment

    Working...
    X