Announcement

Collapse
No announcement yet.

Waxing Skiboards

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    not really, gets off all the wax the scraper cant.
    Fox-Trotting - Thrifty Wanderlust & Adventures

    Skiboard Magazine

    Comment


    • #17
      I use a nylon brush now. Makes the wax so fine.....GGRRReat!


      Boards:

      Spruce 120s(x2), ALPs(x3), Lacroix 99's, BWPs.

      Bindings:

      Pro Prime Riser/Rossi Bindings(x2).

      Comment


      • #18
        tuning in genreral

        step by step and hat has a lot of other tuning things
        http://www.alpinecarving.com/tuning.html
        Boards:
        Line mnp (bug)
        Revel8 revolt (cites)
        Bindings:
        Line ffpro (gold/orange)

        Comment


        • #19
          thats pretty cool. are u putting the wax on to like fill in any scratches ? or just to make them go faster ?

          Comment


          • #20
            both, and to maintain lubrication on the bases. or they will dry out and eventually rot. you will know they are dried out because they start looking white and chalky after a while


            ONE TIME I HUNG OUT WITH DAVE LYNAM IN PERSON

            Comment


            • #21
              Originally posted by Manlenium View Post
              I use a nylon brush now. Makes the wax so fine.....GGRRReat!
              Here is what I came up with from a combination of a bunch of videos and comments I have seen.

              1.) Citrus Cleaner, I use Goo Gone

              2.) Wax down the center, pretty obvious

              3.) Scrape excess wax with a wide scraper

              4.) Use a wire brush to lightly brush off what the scraper missed

              5.) Use a nylon brush to give the bases a nice shiny finish.

              6.) Scrape the edges using a smaller scraper and brush again
              Revel8 ALPdors
              Gold Revel8 Receptors
              Kneissl Flexon Pro Boots

              ____
              ____
              Be who you are, it makes you charismatic...
              If life's not beautiful without the pain, well I'd just rather never ever even see beauty again.

              Comment


              • #22
                One thing I've not gotten clear on is how much wax to leave on. One ski shop told me to scrape it right down to the base. On the other extreme, I've seen skis and snowboards come back from the shop with a visible (and uneven) layer of wax still on. Some people say an index card thickness is about right.

                I'm totally confused. Is there supposed to be a thin layer of wax left, or are we just trying to get wax down into the pores? How do I know when I've sufficiently scraped the "excess" off?
                Revel8 ALP (Alpdors) w/ Spruce Pro Lite
                Revel8 Revolt (Chickens)
                Spruce 120
                Groove AF1 (90)

                Comment


                • #23
                  When I took mine to have it done professionally, the guy who owned the shop also sold me the gear to do it myself afterwards. He showed me how, and recommended that for skiboards I go all the way down to the base, so that I am filling in all the pores and scratches nice and evenly. But he also remarked that it wasnt HUGELY important to do it that way, because when you go out on the snow, after a few runs the snow basically does the scraping job for you. Im not sure which way would be better?
                  2016 Spliffs - Stiff Spliff Sticks!
                  2015 Blunt XLs - My go to All-Mountain All-Day boards
                  2014 Blunts - Short with Attitude
                  2013 KTPS - The Cambered Beasts
                  2012 Rockered Condors - The Big Pow Sticks
                  2002 Line MNP 98cm (Retired)
                  SnowJam 540 Softboot Bindings - My go to bindings
                  Original Rocker Softboot Bindings - For when my friends want to try
                  RVL8 Receptors - Red
                  Line FF Pros (Red - missing)
                  DC Status 2012 Softboot (Looking to Upgrade)
                  Nordica GTS6 Hardboot (Looking to Upgrade)

                  Comment


                  • #24
                    This weekend I conducted an experiment. I went out with my Revolts (105cm) which I had scraped down to the base and my Air Force Ones (90cm) with a thin layer of wax remaining. The AF1s were WAY more slippery on the snow than the Revolts despite the greater length and much better (and years newer) condition of the Revolt's bases.

                    It seemed pretty clear to me that leaving a thin layer of wax is better.

                    edit: I guess I should add that the conditions were old packed powder and ice, the temp was around freezing, and the wax was universal all-temp. For other conditions these results could come out differently.
                    Revel8 ALP (Alpdors) w/ Spruce Pro Lite
                    Revel8 Revolt (Chickens)
                    Spruce 120
                    Groove AF1 (90)

                    Comment


                    • #25
                      Just thought I'd throw this youtube vid up because it helped me the first time I waxed my boards, along with Mark's how to as well.

                      http://www.youtube.com/watch?v=RDRoKCAFtX8

                      It's a snowboard but pretty much the same concept. They guy is pretty good at explaining what's going on too.
                      08 Condors -> FF Pros | 08 KTPs -> FF Pros | Line Sun 83s -> Line comp. Freeblocks

                      Comment


                      • #26
                        I find it funny that I was reading this thread while you posted in it

                        anyhow

                        good vid

                        Comment


                        • #27
                          Just wondering if everyone has seen Mark's ski trip video. At the beginning he waxes a set of boards. Other than that, it's just a cool video.

                          Last edited by Greco; 01-13-2009, 11:38 AM.

                          Boards: Revel8 Revolt "Trees" / Revel8 2008 KTPs / Line Jedi
                          Bindings: Bombers / FF Pros
                          Boots: Raichle 125s



                          Facebook

                          Comment


                          • #28
                            Should I be removing the bindings before hot waxing?

                            Comment


                            • #29
                              It makes it a lot easier.
                              And when I wax my boards, I also take the time to clean the bindings and the topsheets.

                              Comment


                              • #30
                                How long does the whole process take?

                                Is there a YouTube video too?

                                SBOL Team III Rider

                                Skiboards
                                   Revel8 2010 Revolt "Bullseye" 105cm
                                   Revel8 2009 Rumspringa "MaryJane" 103cm
                                   Revel8 2009 Tansho 90cm (BriGirl's)
                                Bindings
                                   Spruce 2011 Pro Jr Risers & Head Release Bindings
                                   Spruce 2010 Pro Lite Risers & Roxy Release Bindings (BriGirl's)
                                Other
                                   Salomon 2009 Mission x4 boots
                                   Sims T22 Omen helmet

                                Comment

                                Working...
                                X